17 Signs You Are Working With Replace Door Lock
How to Replace Door Locks
The replacement of your door lock can be a difficult task. It is important to protect your home from burglars. It is also advisable to change your locks when you move in with new housemates, or if you rent your house.
The majority of new locks are designed to fit standard door widths. If your door is more thick, you'll require a "thick-door" kit with longer screws and longer tail pieces for the deadbolt.
Removal of the old lock
It is necessary to remove the old lock from the door before you install the new one. You can do this with the help of a few tools, but make sure not to damage the door or frame. Using the right tools will save you from costly repairs in the future.
Take off the screws that are the trim and handle. This can be accomplished using the help of a screwdriver. Once the screws are removed, you can take the trim off. You can then remove the screw that binds the handle and trim to the door. After removing screw, you can remove the lock cylinder as well as open the handle.
When you can't wiggle your keys inside, it is a sign that the lock is not working. This is due to the tumblers wearing out and eventually stopping their movement upwards or downwards, causing the lock to stop working. You'll need to get the lock replaced by a locksmith in the event that this happens.
Start by removing the screws that hold the faceplate in place. If your kit doesn't include new screws, you'll need to buy them at a hardware store. If you're installing a mortise lock, you must also remove the screws that attach the external rose plate to the door. After removing the screws, remove the plate and dead bolt.
Next, look for a hole in the handle trim inside. If you find a hole then insert a straightened safety-pin into it. You can also test the flat screwdriver against a depression or slot. This should release the lock handle and expose screws which can be removed to remove the entire lock from the door.
Installing the new lock
Installing a new lock could be done easily, whether you want to replace your lock following a break-in, or you just want to improve your door's appearance. However, it is essential to measure your door to make sure you buy an appropriate lock that is the correct size for your door. This is particularly important for deadbolt locks, as they must be a specific size to fit in the strike pocket and bolt plate. Ask your local hardware store for help when you're not sure what measurement to take.
If you are replacing a mortice, you can use the existing centrerail as a reference to locate the new mortise. Once you have marked the location of the lock, make holes along the centre line to the same size as the lock. Then, chisel away the wood until you've got a clear rectangular space for your mortice lock to fit into. Install the lock and then outline the faceplate using an outliner. Mark and drill screw holes to fix the faceplate in place.
When you are rekeying locks, you can save money by purchasing a starter kit that includes keys that can be re-keyed and a blank key. Kits can be purchased from many online retailers as well as hardware and home improvement stores. They also include a set of instructions that should assist you in completing the task.
Review your lease agreement if you are renting prior to changing locks. You may have to give the landlord the keys to the new locks. You may need to replace the lock with a more standard one if you are required to do so. You can purchase a basic lock from your local hardware store or you can invest in a high-tech lock that connects to your home's WiFI network and lets you to lock and unlock your door from a distance. Schlage Smart Lock is compatible with all levers and knobs. It can also be connected to your home security hub that is smart and will send alerts when your door is opened or locked.
Installing a new lock
A broken lock is an issue for security, so it's essential to replace it quickly. The good news is that replacing the door lock is a quick and easy task that anyone can complete. The first step is removing the old lock. The screws holding it in place are removed and the lock is removed. Depending on the type you have, you may need an Allen wrench or a screwdriver. Once you've removed the old lock keep all parts and store them in a secure location.
Install the new lock on the door. Most kits come with an image of the cardboard template that shows how the lock will fit to the door. If the template does not match to your door you can trace around the template with a pencil, or use a chisel remove any extra material. Once the new lock has been put installed, ensure that the latch plate's interior aligns with the mortise lockset hole for an ideal fit.
When installing the new lock, be cautious not to tighten it too much. This could cause the lock to rattle or even break. If you have a lock that is keyed, make sure the spindle aligns with the hole on the knob. If it's not, you can use the screwdriver to drive the lock into the knob.
After you've installed the new lock, you can now install the decorative base plate that is included with it. If the lock isn't equipped with a base plate with a design, you can buy one that matches the hardware.
The last step is to test the new lock to ensure it functions. This can be done by inserting the lock key and turning the lock so that it is able to open. If it doesn't work, you should consider contacting locksmith.
You can also avoid burglaries by having professionals rekey your locks. This procedure involves changing the internal lock tumblers to ensure that it will no longer accept your old keys. This will make your home secure and will provide you with peace of mind.
Test the new lock
Installing the lock from scratch is a great way to ensure that it will work according to the specifications. It is essential to follow the instructions. If you don't, you may not be able to open your door. If you're not sure what to do, you can contact a professional locksmith for assistance. A locksmith can offer suggestions on the best locks for your home.
If you are having trouble opening your lock it could be a problem with the handle or latch. You can lubricate the latch using graphite or spray it with WD-40. This may help fix the issue. However, you might need to replace the latch completely if it's not functioning correctly.
The lock could have been installed incorrectly. The handle clip inside the door could be damaged or not present on the new lock. In this case, you should grasp the handle from the inside and then insert a new plastic retainer clip. The handle will then be attached to the lock and the lock tested.
It's crucial to check the keypad after replacing your lock to ensure that it is working correctly. You can test it by placing the key in and turning it. If the keypad functions correctly, it will unlock and lock your door.
Examine the deadbolt to be sure it's functioning properly. If it's not it's time to remove the latch and undo the Phillips head screws on the sides of the door in order to unlatch it. Take out official statement and replace it with a new one. Be sure to align and load the deadbolt lock in the correct way.
Spindle testing is an additional method to test the new lock. This can be accomplished by inserting a screwdriver in the spindle. This test should be performed prior to reinstalling the lock in order to avoid errors in installation.